In this method the main advantage is time to automatically duplex deburring and chamfering tools is just within a few seconds and the deployment of the tools can be made immediately, no interruption occurs at any stage of it's operation and any operational skills are not required in the usage of this machinery. We are proud to declare that we are the prime, chamfering tools manufacturer. We also manufacture products like Deburring Tools, hole deburring tools etc. Furthermore, we are leading deburring tools’ supplier in India. Our products like deburring tools, hole deburring tools, chamfering tools, deburring tools and others are stiff and solid enough to hold in any given situation. Our products are long lasting and are affordable as well. Hence smart customers should cash in such a wonderful offer ever. Normally, the bottom side of a drilled hole is deburred or chamfered, after reversing the same job. Our automatic dual purpose deburring & chamfering tool deburrs and chamfers a drilled hole at both side when the tool passes through and reverses. No change either in the spindle speed or in the direction of spindle rotation or in the job set-up is required. The tools can be deployed immediately after drilling. Neither manual interruption nor special operational skill is required at any stage of it's use. The time required for both purpose deburring and chamfering is about few seconds. Further, the chamfers will be uniform & concentric to the bore.
The deburring tool consists of only 4 parts - Shank, HSS Blade, Fulcrum Pin and Screw for adjusting blade projection. The blade, having certain unique features, is made of HSS and it will be coated with Tungsten Carbide to enhance wear resistance. After deburring and chamfering on the top surface of a hole, the blade slowly retracts into the pocket, provided in the tool shank, as the cutting pressure increases the blade gets slowly released from the pocket as. the cutting pressure decreases and the deburring and chamfering operations are done on bottom of the hole.
Special care is taken to ensure that the tool or its parts do not damage the bore. Standard tools are available in sizes from dia 5 mm to 30 mm. The holding shank is cylindrical, so that the tools can be mounted on the machine spindle through a drill check or a collet.
The robust construction, unique design features Tungsten Carbide coating make the tools and the blades highly enduring under the most severe cutting conditions. The blade can be re-sharpened, when its cutting edges get blunt. The tools and the spare blade are priced within everyone's reach.
This is the only existing tool to perform back spot facing operations without any interruption requirement and is the most ideal tool in CNC machines, SPM's with auto-cycle etc. When this is used in boring machines, radial drills, it is known to save time drastically.
|
